ABB Reversing Contactor, BC9R-Y, VBC30, BC9, CA7, 24 Volt DC coil

Description

This is a new contactor set but is being sold for parts.
It can be used as-is but the mechanical interlock is broken.  It could be glued on with epoxy most likely.  The mechanical interlock keeps one contactor from pulling in when the other one is pulled in.  If your control wiring is correct you technically don't need it but it should be there for safety.
It was shipped without the metal mounting plate and the contactors moves and snapped off the mechical interlock as well as some locking tabs on the contactors.
These are new and function as the should except for the interlock.
If you were not going to use these as a reversing contactor none of this will matter and you just separate them and use them for your application.
New this was a 0 to 0 part.
ABB Controls Inc
two 3-pole contactors to make one reversing contactor assembly
24 Volt DC coils
VBC30 interlock (broken)
Two BC0-30-10 contactors
BC9R-Y
26 Amp contactors
Made in France
Came from a closing down factories extra parts cabinet.
Sold as-is with no returns.