Brake Residual Pressure Valve BK Hose Kit Race Racing M10x1mm Car Rally 10 PSI

Description

Brake Residual Pressure Valve BK Hose Kit Race Racing M10x1mm Car Rally 10 PSI
This product data sheet is originally written in English.
Residual Pressure Valve for Disc Brake Systems - 10PSI
+ Fittings for 3/16" Brake Hose
These residual pressure valves retain a minimum brake line pressure to help eliminate excessive pedal travel in both disc and drum brake systems. The 2 PSI valve is used in disc brake applications where the master cylinder is mounted below the horizontal plane of the calipers and fluid drain back occurs from gravity and vibration
.
DESIGN
Made from billet aluminium
Anodized
red
M10 x 1mm thread - industry standard thread type for brake systems
Supplied with 2x Male Fittings to fit 3/16" Braided Brake Hose
Arrow on the valve shows direction in which the valve should be placed
Factory set pressure of 10PSI
Single flare
USE
Install the valve as close as possible in line to the master cylinder to ensure as much of the line as possible is pressurised
Enhances brake performance as it holds a constant pressure in the brake line to ensure the calliper is nearer to the disc, ready for the system to be activated
Greatly aids turning under braking
Especially beneficial where the brake master cylinder is located below the horizontal plane of the
calipers
EXCLUSIVE FEATURES
1 year guarantee
Excellent price and
FREE UK 1st class postage
WARNING
IT IS THE RESPONSIBILITY OF THE PERSON INSTALLING AND BRAKE COMPONENT OR KIT TO DETERMINE THE SUITABILITY OF THAT COMPONENT OR KIT FOR THAT PARTICULAR APPLICATION. IF YOU ARE NOT SURE HOW TO SAFELY USE THIS BRAKE COMPONENT OR KIT, YOU SHOULD NOT INSTALL OR USE IT. DO NOT ASSUME ANYTHING. IMPROPERLY INSTALLED OR MAINTAINED BRAKES ARE DANGEROUS. IF YOU ARE UNSURE, SEEK EXPERT PROFESSIONAL QUALIFIED HELP OR RETURN THIS ITEM TO US. YOU, OR THE PERSON WHO INSTALLS THIS PRODUCT, MUST KNOW HOW TO INSTALL OR PROPERLY USE THIS PRODUCT. IT IS NOT POSSIBLE TO OFFER TECHNICAL ASSISTANCE OVER THE PHONE TO UNDERSTAND OR FORESEE ALL THE ISSUES THAT MIGHT ARISE IN YOUR SPECIFIC INSTALLATION. RACING EQUIPMENT AND BRAKES MUST BE MAINTAINED AND SHOULD BE CHECKED REGULARLY FOR DAMAGE, WEAR OR FATIGUE.
Flutra Systems Residual Pressure Valve - Ideal for Motorsport and Road Going Applications.
To complement these valves, we have a range of other products available in our online store.
These residual pressure valves retain a minimum brake line pressure to help eliminate excessive pedal travel in both disc and drum brake systems. The 2 PSI valve is used in disc brake applications where the master cylinder is mounted below the horizontal plane of the calipers and fluid drain back occurs from gravity and vibration. IT IS THE RESPONSIBILITY OF THE PERSON INSTALLING AND BRAKE COMPONENT OR KIT TO DETERMINE THE SUITABILITY OF THAT COMPONENT OR KIT FOR THAT PARTICULAR APPLICATION. IF YOU ARE NOT SURE HOW TO SAFELY USE THIS BRAKE COMPONENT OR KIT, YOU SHOULD NOT INSTALL OR USE IT. DO NOT ASSUME ANYTHING. IMPROPERLY INSTALLED OR MAINTAINED BRAKES ARE DANGEROUS. IF YOU ARE UNSURE, SEEK EXPERT PROFESSIONAL QUALIFIED HELP OR RETURN THIS ITEM TO US. YOU, OR THE PERSON WHO INSTALLS THI
Brand
Unbranded
Manufacturer Part Number
Does Not Apply
EAN
Does not apply