-40%

Height Leveling Control Air Valve Kit For Haldex KN27000 Freightliner Kenworth

$ 14.78

Availability: 14 in stock
  • Compatible with PN: kn27000
  • Warranty: 1 Year
  • Type: Height Control Leveling Valve
  • Interchange Part Number: 90554241, R3013222, S-9978, S9978, 85106567
  • UPC: 793707964705
  • Manufacturer Part Number: GP346394DH
  • Condition: New
  • Brand: goodshepherd18
  • PORTS: All Port: 3x1/4"

    Description

    The Height valve is used in the vehicle suspension equipment with air spring to
    adjust the height of the air spring by sensing the change of the height of the vehicle
    and carrying out the action of inflation and exhaust in time. The length ratio L/A should be <=1.2 if the maximum Angle of motion is not exceeded 45°.
    Length L should be between 175 and 295mm.
    Height Leveling Control Air Valve Kit For Haldex KN27000 Freightliner Kenworth
    The Height valve is used in the vehicle suspension equipment with air spring to
    adjust the height of the air spring by sensing the change of the height of the vehicle
    and carrying out the action of inflation and exhaust in time.
    The length ratio L/A should be <=1.2 if the maximum Angle of motion is not exceeded 45°.
    Length L should be between 175 and 295mm.
    If shorter yaw bars are used, height valves will produce large air consumption.
    The Vehicle MUST be on level ground to start, and the brakes must be released.
    On most vehicles, you will need to measure from the bottom of the frame to the ground to obtain the proper starting height. You will need 34″ to 34 1/4″.
    Install wood dowels into the top and bottom of the leveling valve and then discharge the air.
    This will prevent the valve from operating. When the air is exhausted, remove the link.
    Jack the frame to the 34″ to 34 1/4″ height.
    Replace the link on the leveling valve.
    Remove the dowels. The vehicle should be level. If not, check the link for defections or bends,
    and check the air system and valve. Repair or replace as needed.
    Description:
    Height Leveling Control Air Valve Kit
    KN27000
    Truck Parts: S-9978
    Velvac:034064
    Euclid:E-13922
    Dayton:334-1967
    BWP:M-27000
    Newstar:S-9978
    PAI:LVC3707
    PORTS All Port: 3x1/4"
    Item Specifics
    Type
    Height Control Leveling Valve
    Manufacturer Part Number
    GP346394DH
    Brand
    goodshepherd18
    Compatible with PN
    kn27000
    Interchange Part Number
    90554241, R3013222, S-9978, S9978, 85106567
    UPC
    793707964705
    PORTS
    All Port: 3x1/4"
    Warranty
    1 Year
    Payment
    ● We only accept payments via PayPal.
    ● Item will be shipped within 72  hours after full payment is received(NOT counting holidays or weekends)
    Shipping
    ● Fedex USPS delivery including a tracking number to our customers.
    ● International shipping is available.
    Return policy
    ● If you need return, please contact our customer service representative, let us know the detailed problem.
    ● Please email us before leaving any negative feedback or open any dispute on PayPal.
    Contact Us
    ● If you are satisfied with the product you received,please leave us positive feedback and 5 scores .
    ● Please give us the opportunity to resolve any problem. We understand the concerns and frustrations you might have, and will try our best to resolve the issues.
    ● We care about our valued customers, and will always try to help you. So if you have any problems, please e-mail us immediately.
    About Us
    ● High Quality
    ● Customer - Service
    We value the service we provide .
    ● Affordable Prices
    We aim to make our service as reasonably priced as possible. That's why we cut on all unessential business expenses.
    Shop Category
    Store Home
    A/C Compressor
    A/C Compressor Clutch
    Coolant Tank
    EGR Valves & Parts
    Fans & Kits
    Radiators
    Radiator Support
    Hoses
    Lighting & Lamps
    ◈  Headlight
    Other
    Hot Item
    100pcs Auto Car Door Fender 6mm Hole Push Plastic Rivets Retainer Clips Black
    USD 5.65
    16" Electric Radiator Fan High 3000 Cfm Thermostat Wiring Switch Relay Kit BLACK
    USD 42.91
    For 07-18 Nissan Altima 2.5L 3.5L 06-18 Maxima Radiator AC Condenser Cooling Fan
    USD 68.50
    100pcs Fender Bumper Grille Push Type Retainer Clips Rivet for GM Universal
    USD 6.60
    Radiator Cooling Fan Assembly Fit For Volkswagen Golf Jetta Rabbit Beetle 2.0L
    USD 100.63
    New List Item
    Front & Rear Left & Right Door Lock Actuator For 2002-04 Honda CR-V 03-07 Pilot
    USD 33.11
    Set of 8 Glow Plug For 1990-1994 Ford F350 7.3L 2004 F-250 Super Duty 6.0L
    USD 18.75
    Steering Shaft For 1979-1993 Dodge D150 W150 D250 W250 D350 W350 Pickup 000940
    USD 53.99
    84630-3SG0A Rear Trunk Lock Latch Actuator For Nissan Sentra 2013/2014/2015
    USD 21.66
    Blue 1200° 8PCS Spark Plug Wire Boots Heat Shield Protector Sleeve SBC BBC
    USD 12.00
    Item Specifics
    Type
    Height Control Leveling Valve
    Manufacturer Part Number
    GP346394DH
    Brand
    goodshepherd18
    Compatible with PN
    kn27000
    Interchange Part Number
    90554241, R3013222, S-9978, S9978, 85106567
    UPC
    793707964705
    PORTS
    All Port: 3x1/4"
    Warranty
    1 Year
    Height Leveling Control Air Valve Kit For Haldex KN27000 Freightliner Kenworth
    The Height valve is used in the vehicle suspension equipment with air spring to
    adjust the height of the air spring by sensing the change of the height of the vehicle
    and carrying out the action of inflation and exhaust in time.
    The length ratio L/A should be <=1.2 if the maximum Angle of motion is not exceeded 45°.
    Length L should be between 175 and 295mm.
    If shorter yaw bars are used, height valves will produce large air consumption.
    The Vehicle MUST be on level ground to start, and the brakes must be released.
    On most vehicles, you will need to measure from the bottom of the frame to the ground to obtain the proper starting height. You will need 34″ to 34 1/4″.
    Install wood dowels into the top and bottom of the leveling valve and then discharge the air.
    This will prevent the valve from operating. When the air is exhausted, remove the link.
    Jack the frame to the 34″ to 34 1/4″ height.
    Replace the link on the leveling valve.
    Remove the dowels. The vehicle should be level. If not, check the link for defections or bends,
    and check the air system and valve. Repair or replace as needed.
    Description:
    Height Leveling Control Air Valve Kit
    KN27000
    Truck Parts: S-9978
    Velvac:034064
    Euclid:E-13922
    Dayton:334-1967
    BWP:M-27000
    Newstar:S-9978
    PAI:LVC3707
    PORTS All Port: 3x1/4"
    Payment
    Shipping
    Return policy
    Contact Us
    About Us
    ● We only accept payments via PayPal.
    ● Item will be shipped within 72  hours after full payment is received(NOT counting holidays or weekends)
    ● Fedex USPS delivery including a tracking number to our customers.
    ● International shipping is available.
    ● If you need return, please contact our customer service representative, let us know the detailed problem.
    ● Please email us before leaving any negative feedback or open any dispute on PayPal.
    ● If you are satisfied with the product you received,please leave us positive feedback and 5 scores .
    ● Please give us the opportunity to resolve any problem. We understand the concerns and frustrations you might have, and will try our best to resolve the issues.
    ● We care about our valued customers, and will always try to help you. So if you have any problems, please e-mail us immediately.
    ● High Quality
    ● Customer - Service
    We value the service we provide .
    ● Affordable Prices
    We aim to make our service as reasonably priced as possible. That's why we cut on all unessential business expenses.
    All rights reserved.