-40%

Invisible Fence MICROLITE RECEIVER V5 SWR/0 700 Series 7k w/Batt + Collar

$ 131.47

Availability: 81 in stock
  • Model: MICROLITE RECEIVER V5 SWR/0
  • Brand: Invisible Fence
  • Condition: Tested and works well. In very good cosmetic condition as shown. Beeps and has a light shock as programmed (I finger test the shock level and judge it as best I can). This is a Microlite receiver so your local IF dealer can adjust the correction (shock) levels to what you desire if needed (they may charge you for this service). Used Collar is in good condition with a little fraying and measures approximately 13" in length when fully extended and is 5/8" wide. Back of battery package is dated 2019 and in my experience these hold their charge very well.
  • Type: Receiver Collar

    Description

    THIS IS A 700 SERIES 7K RECEIVER.  IT IS NOT COMPATIBLE WITH 800 SERIES OR BOUNDARY PLUS TRANSMITTERS.  IF YOU HAVE ANY CONCERNS OVER THIS RECEIVER BEING COMPATIBLE WITH YOUR TRANSMITTER, PLEASE ASK!  I AM HAPPY TO HELP!  JUST BECAUSE THIS RECEIVER MAY LOOK LIKE ONE YOU HAVE DOES NOT MEAN IT WILL BE COMPATIBLE WITH YOUR SYSTEM.
    Invisible Fence MICROLITE RECEIVER V5 SWR/0 7K Frequency 700 Series Receiver With A Sealed Invisible Fence Brand Battery And A Used Invisible Fence Brand Collar.  Item's pictured are the exact one's you will receive.  Will ship USPS First Class Mail requiring a signature upon delivery.
    IMPORTANT, PLEASE READ:
    This collar is compatible with the following Invisible Fence Transmitters:
    ICT-50/50A
    ICT-100/100A
    ICT-150
    ICT-250
    ICT-700
    ICT-725
    ICT-750
    ICT-775
    Invisible Gate
    The transmitter must be set to 7k frequency for the receiver to function.  To check your frequency, remove the lid from your transmitter and look for a small black switch which will offer a choice of 7k or 10k.  Set it to 7k.  The ICT-50 and ICT-100 may just have a sticker on the transmitter board telling you what frequency it is set to.  This 700 Series receiver is NOT compatible with 801, 802 (unless they have a 7xx option on their circuit board) and Boundary Plus transmitters.  IF YOU HAVE ANY QUESTIONS ABOUT THE COMPATIBILITY OF YOUR TRANSMITTER, PLEASE ASK.