-40%

Invisible Fence:Microlite MOD:RIG00-13144 700 Series 7k Receiver w/Batt + Collar

$ 136.75

Availability: 24 in stock
  • Type: Receiver Collar
  • Condition: Tested and works well. In very good cosmetic condition as shown. Beeps and has a light shock as programmed (I finger test the shock level and judge it as best I can). This is a Microlite receiver so your local IF dealer can adjust the correction (shock) levels to what you desire if needed (they may charge you for this service). Used Collar is in fair condition and measures approximately 16" in length when fully extended and is 3/4" wide. The battery compartment can be a little tricky sometimes, you may need to insert and reinsert the battery once or twice until it responds. Once it does it stays on for good. Back of battery package is dated 2019 and in my experience these hold their charge very well.
  • Brand: Invisible Fence
  • Model: MICROLITE RECEIVER

    Description

    THIS IS A 700 SERIES 7K RECEIVER.  IT IS NOT COMPATIBLE WITH 800 SERIES OR BOUNDARY PLUS TRANSMITTERS.  JUST BECAUSE IT LOOKS LIKE YOUR RECEIVER DOES NOT MEAN IT WILL BE COMPATIBLE WITH YOUR CURRENT SET UP.  IF YOU HAVE ANY CONCERNS OVER THIS RECEIVER BEING COMPATIBLE WITH YOUR TRANSMITTER, PLEASE ASK!  I AM HAPPY TO HELP!
    Invisible Fence Brand Microlite MOD: RIG00-13144 7K Frequency 700 Series Receiver With A Sealed Invisible Fence Brand Battery And A Used Lupine Brand Collar.  Item's pictured are the exact one's you will receive.  Will ship USPS First Class Mail requiring a signature upon delivery.
    IMPORTANT, PLEASE READ:
    This collar is compatible with the following Invisible Fence Transmitters:
    ICT-50/50A
    ICT-100/100A
    ICT-150
    ICT-250
    ICT-700
    ICT-725
    ICT-750
    ICT-775
    IFA-12 Indoor Barrier
    Invisible Gate
    The transmitter must be set to 7k frequency for the receiver to function.  To check your frequency, remove the lid from your transmitter and look for a small black switch which will offer a choice of 7k or 10k.  Set it to 7k.  The ICT-50 and ICT-100 may just have a sticker on the transmitter board telling you what frequency it is set to.  This 700 Series receiver is NOT compatible with 801, 802 (unless they have a 7xx option on their circuit board) and Boundary Plus transmitters.  IF YOU HAVE ANY QUESTIONS ABOUT THE COMPATIBILITY OF YOUR TRANSMITTER, PLEASE ASK.