New Universal Car Pointer Turbo Boost Gauge Stepper Motor Black Meter LED

Description

Description
High-quality replacement
Not rebuilt or remanufactured
100% tested For reliability and performance
Undergone strict tests to ensure reliable performance
Top performance For long service life
About the Product
The boost gauge measures the pressure of that air, as it enters the combustion chamber. To achieve this, a special tube is attached to the intake manifold of the engine, and this will gather a tiny amount of the incoming air and present it to the gauge, located on the dashboard.
New Universal Car Pointer Turbo Boost Gauge Stepper Motor Black Meter LED
Description
High-quality replacement
Not rebuilt or remanufactured
100% tested For reliability and performance
Undergone strict tests to ensure reliable performance
Top performance For long service life
About the Product
The boost gauge
measures the pressure of that air, as it enters the combustion chamber
. To achieve this, a special tube is attached to the intake manifold of the engine, and this will gather a tiny amount of the incoming air and present it to the gauge, located on the dashboard.
Increasing boost (within reason) will force more air into the engine, so more fuel can be added to increase the power. So in general, if you add more boost and have an engine tuned to suit will give you more power. Too much boost
can cause turbo or engine failure
.
How to install boost pressure gauge
Working with the vacuum port.
There are two types of gauges and many do not have a sensor to install. If that is the case, you will need to tee a nylon line into the vacuum port. For those installing electronic gauges, there will be a remote sensor that you will need to tee into the port instead of the nylon line.
Attach the tee
.You will cut into the vacuum line and splice into the vacuum line with the three-way tee. Your boost gauge line will tee into the three-way tee.
Run the hose.
The vacuum hose has to be run through the car. Slide it down near the steering column boot on the driver side of the firewall. Using your XACTO knife, cut a hole to pass the line into the pedal assembly. Be careful here, so not to kink it or have it be too close to the pedals, steering column or other things that could cause it to break or kink.
Connect the hose.
Connect the hose to the boost gauge. Those with an electronic boost gauge will have a few more steps. You will need to connect the wiring harness to the pressure solenoid. Then, run the electrical connector into the cabin like the hose would have run.
Connect the wiring
.Remove the lower dash from the metal support beams under the steering column.
Connecting the lights
.Now, you are going to work with the white wire. You want to do this properly so you will still be able to dim your lights.
Package Include
1 * Turbo Boost Gauge
Note
If you have any questions about the product, please do not hesitate to contact us.
Our products are high quality aftermarket parts that can replace the original parts of your car.
Please understand that the color of the product in the photo may be a little different from the real product due to the lighting problem.
Please refer to the listing pictures for an accurate description of the parts included in the kit.
Item Specifics
Brand
T-rank autoparts
Manufacturer Part Number
T108972K
Placement on Vehicle
Front
Surface Finish
New Quality
Warranty
1 Year
Custom Bundle
No
Bundle Description
17.00(L) * 12.50(W) * 8.20(H) CM
Modified Item
No
Universal Part
Yes
Non-Domestic Product
No
Part Type
Turbo Boost Gauge
Country/Region of Manufacture
Unknown
Payment
Immediate payment is required during checkout. We will process and ship orders once checkout is completed.
Shipping
Please note that shipping times on Ebay are estimates. Generally our product arrives faster than the estimated times but on occasion that wont be the case. If you need it by a specific day please confirm prior to ordering or upgrade to the next day service. We do not ship product on weekends or holidays
Returns
When returning products to us you must provide: Item Number Buyer ID Your Address Your Phone Number Reason for Return Tracking We only offer refunds if the return is handled within the first 30 days (as per our policy) so any returns after the 30 day period will be via repair or replacement.
Contact Us
Customer satisfaction is very important to us and our feedback rating reflects this satisfaction. If you have any question or concern, please contact us via ebay message.If you don't get response within 1-2 business days, please check your eBay email or My Messages in case your email provider has an overly-aggressive spam filter blocking eBay or my emails.
Positive feedback will be left automatically to customers when your payment is cleared.
Warranty
We fully guarantee customers an exchange or refund within 14 business days of receipt if item DOA (damage on arrival).
Warranty excludes normal product lifetime wear-out, wear and tear or abuse.
Warranty does not apply to conditions resulting from misuse, abuse, negligence, accident, improper application, improper installation or alteration.
For malfunction products under warranty period, please contact our customer service via EBay Message.
DESCRIPTION
PAYMENT
SHIPPING
RETURN POLICY
CONTACT US
Shop Category
Store Home
alternator
boat cover
boost gauge
car cover
carburetor
catalytic converter
Drive Shaft
engine support
floor mat
fuel line
Other
parking sensor
pressure gauge
rectifier
relay
sensor
starter
stator
steering Rack
transmission filter
Hot Item
For Chevrolet Silverado 1500 Transmission Filter & Gasket & Solenoid A & B Kit
USD 45.99
5 Ft. x 3/8 Black Small Engine Hose Universal Braided CPE Oil Fuel Gas Line Hose
USD 11.12
Silver Alternator for Nissan Murano SE Sport Utility 3.5L 2003-2007 AHI0027
USD 86.99
For Buick Lucerne TCC & EPC Solenoid & 2 Shift Solenoids & Pressure Switch Kit
USD 55.00
55435 Exhaust Catalytic Converter Fit for 2002-2006 Toyota Camry SE Sedan 2.4L
USD 125.00
Excellent Delivery
Help & Info
Payment Policy
Shipping Policy
Return Policy
FAQ
About Us
New List Item
Steering Rack and Pinion & 4 Outer Tie Rod Ends for 2000-06 Toyota Tundra 25544
USD 275.66
For 1998-2002 Hodna Accord Power Steering Rack and Pinion & 4 Outer Tie Rod Ends
USD 225.49
Steering Rack and Pinion & 2 Outer Tie Rod Ends 26-1618 for 95-04 Toyota Tacoma
USD 260.86
Steering Rack and Pinion & 2 Outer Tie Rods for 2003-2009 Chevrolet Trailblazer
USD 260.99
Rack and Pinion & Lower Ball Joints & Tie Rods 22-1036 for Chevrolet Avalanche
USD 385.19
New Universal Car Pointer Turbo Boost Gauge Stepper Motor Black Meter LED
Description
High-quality replacement
Not rebuilt or remanufactured
100% tested For reliability and performance
Undergone strict tests to ensure reliable performance
Top performance For long service life
About the Product
The boost gauge
measures the pressure of that air, as it enters the combustion chamber
. To achieve this, a special tube is attached to the intake manifold of the engine, and this will gather a tiny amount of the incoming air and present it to the gauge, located on the dashboard.
Increasing boost (within reason) will force more air into the engine, so more fuel can be added to increase the power. So in general, if you add more boost and have an engine tuned to suit will give you more power. Too much boost
can cause turbo or engine failure
.
How to install boost pressure gauge
Working with the vacuum port.
There are two types of gauges and many do not have a sensor to install. If that is the case, you will need to tee a nylon line into the vacuum port. For those installing electronic gauges, there will be a remote sensor that you will need to tee into the port instead of the nylon line.
Attach the tee
.You will cut into the vacuum line and splice into the vacuum line with the three-way tee. Your boost gauge line will tee into the three-way tee.
Run the hose.
The vacuum hose has to be run through the car. Slide it down near the steering column boot on the driver side of the firewall. Using your XACTO knife, cut a hole to pass the line into the pedal assembly. Be careful here, so not to kink it or have it be too close to the pedals, steering column or other things that could cause it to break or kink.
Connect the hose.
Connect the hose to the boost gauge. Those with an electronic boost gauge will have a few more steps. You will need to connect the wiring harness to the pressure solenoid. Then, run the electrical connector into the cabin like the hose would have run.
Connect the wiring
.Remove the lower dash from the metal support beams under the steering column.
Connecting the lights
.Now, you are going to work with the white wire. You want to do this properly so you will still be able to dim your lights.
Package Include
1 * Turbo Boost Gauge
Note
If you have any questions about the product, please do not hesitate to contact us.
Our products are high quality aftermarket parts that can replace the original parts of your car.
Please understand that the color of the product in the photo may be a little different from the real product due to the lighting problem.
Please refer to the listing pictures for an accurate description of the parts included in the kit.
Item Specifics
Brand :
T-rank autoparts
Manufacturer Part Number :
T108972K
Placement on Vehicle :
Front
Surface Finish :
New Quality
Warranty :
1 Year
Custom Bundle :
No
Bundle Description :
17.00(L) * 12.50(W) * 8.20(H) CM
Modified Item :
No
Universal Part :
Yes
Non-Domestic Product :
No
Part Type :
Turbo Boost Gauge
Country/Region of Manufacture :
Unknown
Payment
Shipping
Returns
Contact Us
Warranty
Immediate payment is required during checkout. We will process and ship orders once checkout is completed.
Please note that shipping times on Ebay are estimates. Generally our product arrives faster than the estimated times but on occasion that wont be the case. If you need it by a specific day please confirm prior to ordering or upgrade to the next day service. We do not ship product on weekends or holidays
When returning products to us you must provide: Item Number Buyer ID Your Address Your Phone Number Reason for Return Tracking We only offer refunds if the return is handled within the first 30 days (as per our policy) so any returns after the 30 day period will be via repair or replacement.
Customer satisfaction is very important to us and our feedback rating reflects this satisfaction. If you have any question or concern, please contact us via ebay message.If you don't get response within 1-2 business days, please check your eBay email or My Messages in case your email provider has an overly-aggressive spam filter blocking eBay or my emails.
Positive feedback will be left automatically to customers when your payment is cleared.
We fully guarantee customers an exchange or refund within 14 business days of receipt if item DOA (damage on arrival).
Warranty excludes normal product lifetime wear-out, wear and tear or abuse.
Warranty does not apply to conditions resulting from misuse, abuse, negligence, accident, improper application, improper installation or alteration.
For malfunction products under warranty period, please contact our customer service via EBay Message.
All rights reserved.