Wireless Electric Dog Fence Pet Containment System Shock Collars For 3 Dogs Safe

Description

Product Description:
889 waterproof wireless fence: transmitter plug power supply
LED display 100, 200, 300, 500, 990 feet, brushed metal surface, plastic mirror effect, no need to match the code, you can use multiple dogs at the same time
Prompt
Please read the instructions carefully before use.
Transmitter: plug-powered
Please use it in an open area with no obstacles. Place the transmitter 1 meter above the ground.
Because obstacles will affect the use distance of the product.
It is not suitable for aggressive dogs. If your dog is prone to aggressive behavior, please do not use this product.
If you are not sure whether this product is suitable for your dog, please contact your veterinarian or a certified trainer.
Use the original charger to charge indoors.
Avoid leaving the collar on the dog for more than 12 hours a day.
Clean the contact area of ​​the dog's neck and collar with a damp cloth every week.
If you notice a rash or sore, stop using the collar until the skin heals.
Product description:
The wireless pet fence is the latest product on the market, simple and practical.
It can be put on the table, hung on the wall or used outdoors, effectively preventing the habit of pets running around.
Product Features:
1. LED display 5 level signal fence distance (according to the environment, there is an error distance of ±16ft.)
100 feet, 200 feet, 300 feet, 500 feet, 990 feet
2. Both the transmitter (battery type) and the receiver can be charged, and the receiver is waterproof.
3. Reflective fluorescent TPU collar to improve safety at night.
4. The silicone sleeve is put on the electric shock head to avoid pet skin contact with metal.
Operating mode:
1. There is no need to pair the transmitter and receiver, just use it directly
2. A transmitter can be connected to 5 receivers at most.
Testing method:
Before use, please fully charge and use the following 1 + 2 method to confirm
Whether it works (the electric shock test needs to use the LED test light tool).
3. After turning on the power of the transmitter and receiver, then turn off the power of the transmitter,
The receiver will always start bi-bi-bi.
working principle:
1. The receiver does not work within the set distance, and will work as follows when it exceeds.
2. When it exceeds the set range, the receiver working mode is as follows: 1--2--3,
(Light flashes)
1) Sound for 5 seconds
2) Electric shock for 5 seconds
3) Sound and electric shock last for 6 seconds at the same time
3. After 2 working mode cycles, di-di-di sound is always emitted until
The dog returns to the set distance range
4. After standing for 5 minutes, it will enter standby power saving mode.
5. After the second time there is no signal, it will work with a delay of 5 seconds
User's guidance:
1. Support up to 5 dogs, the maximum straight line radius is 990ft, centered on the transmitter.
2. When the dog exceeds the set range, the receiver will automatically start working mode
3. Please keep the transmitter always on, otherwise, the receiver will enter the working mode, two working modes, and always bi-bi-bi.
Receiver usage guide
1. The receiver is waterproof and rechargeable, and the metal probe can be replaced according to the length of the dog's hair.
If the receiver enters the dormant state after 5 minutes in a static state, the receiver will be awakened by touching it.
2. Press the power button for 1 second, the receiver will turn on, and the power indicator will stay on. Press the power button lightly to turn off the product.
3. The LED test light is used to test the electric shock, and the test light is on to indicate that the electric shock is normal.
The inner 6 feet can be used as a wrench for fixing metal probes.
Charging:
1. The transmitter is directly plugged into the power supply for power supply, without battery, not rechargeable
2. The receiver uses 5V 400mah lithium battery, it takes 1-2 hours to charge, the red light flashes when charging, it can be used repeatedly about 500 times.
Receiver low battery reminder:
The red light flashes, and the green light is on when it is fully charged.
Note:
Please make sure that the transmitter is always on, otherwise, the receiver will enter the working mode, shock your dog twice, and always bi-bi-bi.
Packege includes(For 1 dog system);
1*receiver,
1*transmitter,
1*power supply,
1*power cord,
1*reflective fluorescent tape TPU-1,
1*test lamp,
4*electric shock column and silicone sleeve.
1*Instruction
Packege includes(For 2 dog system);
2*receiver,
1*transmitter,
1*power supply,
1*power cord,
1*reflective fluorescent tape TPU-1,
1*test lamp,
4*electric shock column and silicone sleeve.
1*Instruction
Packege includes(For 3 dog system);
3*receiver,
1*transmitter,
1*power supply,
1*power cord,
1*reflective fluorescent tape TPU-1,
1*test lamp,
4*electric shock column and silicone sleeve.
1*Instruction
Packege includes(For extal collar);
1x
Addtional Collar